HOME > Detail View

Detail View

Structure and properties of engineering materials 4th ed., an updated revision, broadened in scope, of the 3rd ed. of the book formerly entitled Structure and properties of alloys

Structure and properties of engineering materials 4th ed., an updated revision, broadened in scope, of the 3rd ed. of the book formerly entitled Structure and properties of alloys (Loan 13 times)

Material type
단행본
Personal Author
Brick, Robert Maynard, 1908- Pense, Alan W. joint author. Gordon, Robert B. (Robert Boyd), 1929- joint author.
Title Statement
Structure and properties of engineering materials / Robert M. Brick, Alan W. Pense, Robert B. Gordon.
판사항
4th ed., an updated revision, broadened in scope, of the 3rd ed. of the book formerly entitled Structure and properties of alloys.
Publication, Distribution, etc
New York :   McGraw-Hill,   c1977.  
Physical Medium
xii, 500 p. : ill. ; 24 cm.
Series Statement
McGraw-Hill series in materials science and engineering.
ISBN
0070077215
Bibliography, Etc. Note
Includes bibliographical references and index.
Subject Added Entry-Topical Term
Materials. Alloys. Metalurgia Fisica
000 01207camuuu200301 i 4500
001 000000618350
005 19981126142809.0
008 761012s1977 nyua b 001 0 eng
010 ▼a 76048091 //r86
020 ▼a 0070077215
040 ▼a DLC ▼c DLC ▼d UBA
049 1 ▼l 421025752 ▼f 과학 ▼l 421030247 ▼f 과학 ▼l 421030248 ▼f 과학 ▼l 421035866 ▼f 과학 ▼l 422412652 ▼f 과학 ▼l 422440005 ▼f 과학
050 0 ▼a TA403 ▼b .B758 1977
082 0 0 ▼a 620.1/12
090 ▼a 620.16 ▼b B849s4
100 1 ▼a Brick, Robert Maynard, ▼d 1908-
245 1 0 ▼a Structure and properties of engineering materials / ▼c Robert M. Brick, Alan W. Pense, Robert B. Gordon.
250 ▼a 4th ed., an updated revision, broadened in scope, of the 3rd ed. of the book formerly entitled Structure and properties of alloys.
260 ▼a New York : ▼b McGraw-Hill, ▼c c1977.
300 ▼a xii, 500 p. : ▼b ill. ; ▼c 24 cm.
440 0 ▼a McGraw-Hill series in materials science and engineering.
504 ▼a Includes bibliographical references and index.
650 0 ▼a Materials.
650 0 ▼a Alloys.
650 7 ▼a Metalurgia Fisica ▼2 larpcal.
700 1 ▼a Pense, Alan W. ▼e joint author.
700 1 ▼a Gordon, Robert B. ▼q (Robert Boyd), ▼d 1929- ▼e joint author.

No. Location Call Number Accession No. Availability Due Date Make a Reservation Service
No. 1 Location Science & Engineering Library/Sci-Info(Stacks2)/ Call Number 620.16 B849s4 Accession No. 421030247 Availability Available Due Date Make a Reservation Service B M
No. 2 Location Science & Engineering Library/Sci-Info(Stacks2)/ Call Number 620.16 B849s4 Accession No. 421035866 Availability Available Due Date Make a Reservation Service B M
No. 3 Location Science & Engineering Library/Sci-Info(Stacks2)/ Call Number 620.16 B849s4 Accession No. 422412652 Availability Available Due Date Make a Reservation Service B M
No. 4 Location Science & Engineering Library/Stacks 2(Western Books)/ Call Number 620.16 B849s4 Accession No. 421025752 Availability Available Due Date Make a Reservation Service B M
No. 5 Location Science & Engineering Library/Stacks 2(Western Books)/ Call Number 620.16 B849s4 Accession No. 421030248 Availability Available Due Date Make a Reservation Service B M
No. 6 Location Science & Engineering Library/Stacks 2(Western Books)/ Call Number 620.16 B849s4 Accession No. 422440005 Availability Available Due Date Make a Reservation Service B M
No. 7 Location Sejong Academic Information Center/Science & Technology/ Call Number 620.11 B849s4 Accession No. 452020371 Availability Available Due Date Make a Reservation Service M
No. 8 Location Sejong Academic Information Center/Science & Technology/ Call Number 620.11 B849s4 Accession No. 452030874 Availability Available Due Date Make a Reservation Service M
No. Location Call Number Accession No. Availability Due Date Make a Reservation Service
No. 1 Location Science & Engineering Library/Sci-Info(Stacks2)/ Call Number 620.16 B849s4 Accession No. 421030247 Availability Available Due Date Make a Reservation Service B M
No. 2 Location Science & Engineering Library/Sci-Info(Stacks2)/ Call Number 620.16 B849s4 Accession No. 421035866 Availability Available Due Date Make a Reservation Service B M
No. 3 Location Science & Engineering Library/Sci-Info(Stacks2)/ Call Number 620.16 B849s4 Accession No. 422412652 Availability Available Due Date Make a Reservation Service B M
No. 4 Location Science & Engineering Library/Stacks 2(Western Books)/ Call Number 620.16 B849s4 Accession No. 421025752 Availability Available Due Date Make a Reservation Service B M
No. 5 Location Science & Engineering Library/Stacks 2(Western Books)/ Call Number 620.16 B849s4 Accession No. 421030248 Availability Available Due Date Make a Reservation Service B M
No. 6 Location Science & Engineering Library/Stacks 2(Western Books)/ Call Number 620.16 B849s4 Accession No. 422440005 Availability Available Due Date Make a Reservation Service B M
No. Location Call Number Accession No. Availability Due Date Make a Reservation Service
No. 1 Location Sejong Academic Information Center/Science & Technology/ Call Number 620.11 B849s4 Accession No. 452020371 Availability Available Due Date Make a Reservation Service M
No. 2 Location Sejong Academic Information Center/Science & Technology/ Call Number 620.11 B849s4 Accession No. 452030874 Availability Available Due Date Make a Reservation Service M

Contents information

Table of Contents


CONTENTS
Preface = xi
Chapter 1 Structure and Properties of Unalloyed Metals = 1
  1-1 Crystal Structure of Metals = 2
  1-2 Crystals, Grains, and Grain Boundaries = 9
  1-3 Structure of Nonmetallic Solids = 12
  1-4 Characterization of Mechanical Properties and Property Tests = 16
  1-5 Thermal, Electrical, and Magnetic Properties = 26
  1-6 Generalized Properties of Unalloyed Metals = 34
  PROBLEMS = 39
  REFERENCES = 40
Chapter 2 Strengthening Mechanisms ; Solid-Solution Hardening = 42
  2-1 Criteria for the Formation of Solid Solutions = 42
  2-2 Mechanism of Solidification = 44
  2-3 Solidification of Metals = 48
  2-4 Cu-Ni Phase Diagram = 50
  2-5 Segregation in Cast Cu-Ni Alloys = 54
  2-6 Diffusion = 56
  2-7 Properties of Solid Solutions = 62
  2-8 Ordered Solid Solutions = 66
  PROBLEMS = 67
  REFERENCES = 67
Chapter 3 Strengthening Mechanisms : Deformation Hardening and Annealing = 69
  3-1 Plasticity of Metals = 69
  3-2 Property Changes due to Cold Working = 77
  3-3 Annealing = 80
  3-4 Property Changes upon Annealing = 87
  3-5 Hot Working = 87
  3-6 Preferred Orientation and Directional Properties = 89
  PROBLEMS = 91
  REFERENCES = 92
Chapter 4 Strengthening Mechanisms ; Multiphase Eutectic Structures = 93
  4-1 The Eutectic Diagram for Ph : Sb = 93
  4-2 Eutectics of Al : Si and Al : Mg = 96
  4-3 Multicomponent Eutectics = 98
  4-4 Eutectic Structures = 99
  4-5 Characteristic Properties of Eutectic-System Alloys = 102
  PROBLEMS = 107
  REFERENCES = 107
Chapter 5 Strengthening Mechanisms ; Precipitation Hardening = 109
  5-1 General Mechanism of Hardening = 109
  5-2 Precipitation from Solid Solution = 111
  5-3 Age Hardening of Al-Cu Alloy = 114
  5-4 Variables Affecting Al-Cu Age-hardening Response = 118
  5-5 Age-hardenable Cu-Be Alloys = 121
  PROBLEMS = 124
  REFERENCES = 125
Chapter 6 Strengthening Mechanisms ; The Martensite Transformation in Iron-Carbon Alloys = 126
  6-1 Fe- Fe3 C Phase Diagram = 127
  6-2 Iron-Carbon Alloys = 129
  6-3 Microstructure of Nonhardened Steels = 133
  6-4 Theory of the Heat Treatment of Steel = 136
  6-5 Formation of Martensite = 141
  6-6 Transformation of Noneutectoid Steels = 146
  6-7 Thermal Effects, Volume Changes, and Related Stresses Accompanying Transformations = 149
  6-8 Tempering of Martensite = 152
  6-9 Microstructures of Isothermally Transformed Steels = 154
  6-10 Properties of Ferrite-Carbide Aggregates = 161
  PROBLEMS = 164
  REFERENCES = 165
Chapter 7 Copper and Copper Alloys = 166
  7-1 Unalloyed Coppers = 166
  7-2 The Brasses, Cu-Zn Alloys = 169
  7-3 Properties of Wrought Brasses = 178
  7-4 Tin Bronzes ; Cu-Sn Alloy System = 180
  7-5 Silicon and Aluminum Bronzes = 182
  7-6 Cast Copper-base Alloys = 182
  PROBLEMS = 185
  REFERENCES = 185
Chapter 8 Aluminum Alloys = 186
  8-1 Aluminum-Alloy Systems = 186
  8-2 Work-hardenable Wrought Alloys = 188
  8-3 Heat-treatable aluminum alloys = 191
  8-4 Cast-Aluminum Alloys, Problems and Properties = 193
  8-5 Microstructures of Cast Alloys = 197
  8-6 Residual Stresses and Relaxation = 198
  PROBLEMS = 205
  REFERENCES = 206
Chapter 9 Magnesium and Beryllium = 207
  9-1 Fundamental Alloying Nature of Magnesium = 207
  9-2 Pertinent Phase Diagrams and Alloy Systems = 210
  9-3 Microstructures of Magnesium Alloys = 213
  9-4 Properties of Sand-cast Magnesium Alloys = 214
  9-5 Properties of Wrought-Magnesium Alloys = 223
  9-6 General Characteristics of Magnesium Alloys = 225
  9-7 Beryllium and Its Properties = 227
  PROBLEMS = 232
  REFERENCES = 232
Chapter 10 Titanium and Zirconium ; Titanium Alloys = 233
  10-1 Characteristics of Pure Titanium = 234
  10-2 Phase Diagrams of Titanium Alloys = 236
  10-3 Heat Treatment of Titanium Alloys = 243
  10-4 Microstructures of Titanium Alloys = 246
  10-5 Properties of Titanium Alloys = 246
  10-6 Titanium Technology and Applications = 250
  10-7 Superplasticity and Superplastic Forming of Ti Alloy = 251
  PROBLEMS = 253
  REFERENCES = 253
Chapter 11 Iron and Steel Alloys : Low-Carbon Steels = 254
  11-1 Typical Steelmaking Processes = 255
  11-2 Continuous Casting of Steel = 256
  11-3 Grain Size of Steels = 258
  11-4 Steels Not Heat-treated for Strength = 260
  11-5 Low-Alloy High-Strength Steels = 267
  11-6 Fusion Welding of Low-Carbon Steel = 270
  11-7 Carburizing of Low-Carbon Steels = 273
  PROBLEMS = 278
  REFERENCES = 278
Chapter 12 Iron and Steel Alloys : Medium-Carbon Steels = 279
  12-1 Designation of Medium-Carbon Steels = 281
  12-2 Hardenability = 282
  12-3 Hardenable Carbon Steels = 287
  12-4 Hardenable Alloy Steels = 288
  12-5 Austempering and Marquenching = 296
  12-6 Ultrahigh-Strength Steels = 298
  12-7 Special Processing of Steels = 302
  PROBLEMS = 304
  REFERENCES = 304
Chapter 13 Tool Materials = 305
  13-1 Classification of Tool Steels = 305
  13-2 Phase Diagram of High-Speed Steels = 307
  13-3 Transformation Diagrams of Tool Steels and Their Uses = 309
  13-4 Tempering of Tool Steels = 315
  13-5 Microstructures = 319
  13-6 Tool-Steel Heat-Treatment Problems = 320
  13-7 Dimensional Changes upon Heat Treatment = 330
  13-8 Cemented Carbides and Other Tool Materials = 331
  13-9 Selection of Tool Steels = 333
  PROBLEMS = 335
  REFERENCES = 336
Chapter 14 Iron and Steel Alloys : Stainless Steels = 337
  14-1 Phase Diagrams for Stainless Steels = 337
  14-2 Classification of Stainless Steels = 341
  14-3 Microstructures = 343
  14-4 Heat Treatment of Stainless Steels = 345
  14-5 Mechanical Properties of Stainless Steels = 348
  14-6 Corrosion Resistance of Stainless Steels = 351
  PROBLEMS = 355
  REFERENCES = 355
Chapter 15 Cast Irons = 356
  15-1 Fe-C-Si Phase Diagram = 356
  15-2 Graphitization upon Solidification of Gray Cast Iron = 358
  15-3 Graphitization in the Solid State ; Malleable Cast Iron = 361
  15-4 Nodular or Spherulitic Graphite Cast Iron = 364
  15-5 Microstructures = 365
  15-6 Properties of Cast Irons = 366
  PROBLEMS = 375
  REFERENCE = 375
Chapter 16 Metals for High-Temperature Service = 376
  16-1 Basic Properties of Refractory Metals at High Temperatures = 377
  16-2 Nickel- and Iron-Nickel-based Superalloys = 381
  16-3 Cobalt-based Superalloys = 386
  16-4 Group VA Metals : Vanadium, Niobium, and Tantalum = 390
  16-5 Group VIA Metals : Chromium, Molybdenum, and Tungsten = 394
  16-6 Coatings for Refractory Metals = 400
  PROBLEMS = 401
  REFERENCES = 401
Chapter 17 Engineering Polymers = 402
  17-1 Bonding and Structure in Polymers = 403
  17-2 General Mechanical Behavior of Polymers = 410
  17-3 Olefin, Vinyl, and Related Polymers = 413
  17-4 Heterochain Thermoplastics = 418
  17-5 Thermosetting Polymers = 421
  17-6 Elastomers = 423
  PROBLEMS = 425
  REFERENCES = 425
Chapter 18 Engineering Ceramics = 426
  18-1 Clay and Clay Products = 427
  18-2 Crystalline Ceramics = 429
  18-3 Glasses = 432
  PROBLEMS = 439
  REFERENCES = 439
Appendix 1 Metallography = 440
  A1-1 Specimen Preparation = 440
  A1-2 Quantitative Metallography = 442
  A1-3 Electron Microscopy = 442
  A1-4 Microprobe Analysis = 444
Appendix 2 Failures of Materials = 446
  A2-1 Types of Fracture = 447
  A2-2 Mechanism of Brittle Fracture = 448
  A2-3 Suppression of Brittle Fracture = 450
  A2-4 Linear Elastic Fracture Mechanics = 453
  A2-5 Mechanism of Ductile Fracture = 454
  A2-6 Failure through Creep = 455
  A2-7 Fatigue Failures = 458
  A2-8 Nondestructive Testing = 459
Appendix 3 Splat Cooling and Metal Glasses = 461
Appendix 4 Phase Diagrams = 463
Index = 493

New Arrivals Books in Related Fields